| Machine
Products --> Volumetric Powder Feeder
Machine
Products:
P-Series
Volumetric Powder Feeders
The
Palmer P-Series provides accurate, consistent
additions of: Red Iron Oxide, Black Iron Oxide, and
Bentonite. It also works with other difficult to
meter solids. Capacities from .1 to 140 cu. ft. per
hour. Includes solid state DC drive. A flexible,
externally massaged hopper is included. The P-Series
can be custom sized for each application.
General
details:
-
Flexible
Polyurethane Hopper
-
Stainless
Steel Massaging Paddles
-
304
Stainless Steel Feed Tube and Auger
-
90-Volt
DC Gearhead Drive Motor
-
Flexible
Roller Chain Drive System
-
Sealed
Drive Train & Cabinet
-
Solid
State Control, Pushbutton Controls
RETURN
TO TOP
 Hopper:
The
polyurethane hopper is extremely flexible and is
stronger, more resilient, and more abrasion
resistant than traditional vinyl designs. There are
no internal cracks or ledges to collect and retain
material. The hopper interlocks with the cabinet for
an airtight seal. The hopper sides are kept in
constant motion by steel paddles that continually
force material down around the feed auger and
maintain consistent material density.
RETURN
TO TOP
The cabinet is made
of mild steel and is coated with an oven-baked TGIC
polyester finish. The cabinet is sealed by the
hopper protecting the working parts from water,
dust, and dry materials.
The drive train is
housed in a galvanized steel chassis that completely
lifts out of the cabinet for easy inspection and
maintenance. The drive train features stainless
steel massaging paddles, sealed roller bearings, and
a flexible roller chain drive that never requires
tension adjustment.
The drive motor is a
90-volt DC gearhead motor that provides consistent,
accurate output ROM
RETURN
TO TOP
 The
electrical controls are housed in a remote NEMA
enclosure for mounting in a convenient location.
Auger RPM is controlled by a pushbutton
potentiometer located in the door of the enclosure.
The three-digit pushbutton adjustment allows for
very precise output adjustment.
RETURN
TO TOP
|
Model
|
Standard
Motor Horsepower
|
Maximum
Cubic Ft. per Hour
|
Maximum
Output in Lbs. per Minute at 70 lbs. per Cubic
Ft.
|
|
P-5
|
1/8
|
7
|
8.1
|
|
P-12
|
1/2
|
100
|
117
|
|
P-28
|
1
|
900
|
1,050
|
RETURN
TO TOP
- Standard P-5
Hoppers:
- 1 Cubic Ft.
Hopper for P-5
- 5 Cubic Ft.
Hopper for P-5
- Standard P-12
Hoppers:
- 5 Cubic Ft.
Hopper for P-12
- 10 Cubic Ft.
Hopper for P-12
- P-28 Hoppers
Available -- Consult Factory
- High/Low Addition
Levels with Remote Selector Switch
- EZ-Calibrate Kit
- Mount Kit for
Continuous and Batch Mixers
|
