| Machine
Products --> Compaction Tables
--> V-Series High Frequency Rotary Compaction
Tables  Machine
Products:
V-Series High Frequency Rotary Compaction Tables
Construction
The rugged steel
frame is fabricated from 4" x 4" x
1/4" wall steel tubing. The lift bar assembly
is fabricated from 5/8" x 8" steel with a
3/4" x 12" steel base plate.
The lift bar assembly
is actuated by the pneumatic lift bags, each with a
capacity of 850 lbs. each and a maximum stroke of
2.0". In the elevated position the lift bars
extend above the roller conveyor approximately
1/2". Reversing Vibrators
Reversing vibrators
are used to obtain the optimum compact ability of
molds and cores. The reversing vibrators provide a
different level of output force for each direction
of rotation. The use of two of these vibrators
produces four different output force levels while
maintaining the high frequency vibration that is
critical for the correct compaction.
General
Specifications
|
Model
|
V-500-LB
|
V-2000-4-LB
|
V-3000-4-LB
|
V-4000-4-LB
|
V-6000-4-LB
|
V-10000-4-LB
|
|
Maximum
Capacity
|
500
lbs.
|
2,000
lbs.
|
3,000
lbs.
|
4,000
lbs.
|
6,000
lbs.
|
10,000
lbs.
|
|
Table
Size**
|
24”
x 48”
|
48”
x 36”
|
60”
x 60”
|
36”
x 60”
|
48”
x 60”
|
48”
x 60”
|
|
Top
|
Lift
Bar
|
Lift
Bar
|
Lift
Bar
|
Lift
Bar
|
Lift
Bar
|
Lift
Bar
|
|
Height**
|
24”
is standard, however, each table can be
customized to fit the application's exact
requirements.
|
|
Vibrator(s)
|
1/3-HP,
3-Phase, 240/480-Volt, 60-HZ, Reversible
3600-RPM with an
|
|
Number
of Vibrators
|
1 |
2 |
2 |
2 |
2 |
2 |
|
Lift
Bars
|
5/8”
x 8” Steel
|
|
Air
Bags
|
4
@ 850 lbs. each
|
4
@ 850 lbs. each
|
6
@ 850 lbs. each
|
6
@ 850 lbs. each
|
8
@ 850 lbs. each
|
12
@ 850 lbs. each
|
|
Number
of Output Forces
|
Two
|
Four
|
Four
|
Four
|
Four
|
Four
|
|
Timer
Starter
|
Included
|
|
Timer
Starter Enclosure
|
Remote
|
|
CONTROLS
|
Automatic
cycle timer for one-button operation to raise
box, vibrate for a set amount of time, and
lower back onto conveyor. Pedestal-mounted
control panel is included and will have a
4-position switch for force output selection,
cycle start button, and emergency stop button.
|
|
Approximate
Weight of Table
|
900
lbs.
|
1,100
lbs.
|
1,700
lbs.
|
1,900
lbs.
|
2500
lbs.
|
4000
lbs.
|
Controls
All reversing motor
starter and timer relays will be housed in the main
electrical enclosure. The cycle start button and the
force selector switch will be located at the
operator control box.
Operation
The mold/core box is
rolled onto the table rollers and filled. Prior to
striking off, the operator presses the "cycle
start" button. The air bags inflate lifting the
core/mold above the rollers, the vibrator(s) run the
amount of time set on the timer located inside the
enclosure. Once the vibrators stop, the air bags
lower the core/mold to roller conveyor surface for
striking off.
Options
- Flat Top
- Manual
Conveyor
- Powered Conveyor
|
