| |
Model
V-1500-I-LB
|
Model
V-3000-I-LB
|
|
Maximum
Capacity
|
1,500
lbs.
|
3,000
lbs.
|
|
Table
Size
|
22”
x 36” (or sized to fit)
|
72”L
x 22”W (or sized to fit)
|
|
Top
|
Lift
Bar
|
Lift
Bar
|
|
Height
|
24”
(or to customer specifications)
|
24”
(or to customer specification)
|
|
Vibrator
(s)
|
1-Phase,
480-Volt, 60-HZ, 3600 CPM
|
1-Phase,
480-Volt, 60-HZ, 3600 CPM
|
|
Lift
Bars
|
5/8”
x 8” Steel
|
5/8”
x 8” Steel
|
|
Air
Bags
|
Four
at 850-lb. Capacity Each
|
Six
at 850-lb. Capacity Each
|
|
Number
of Output Forces
|
Infinite
|
Infinite
|
|
Number
of Vibrators
|
One
|
Two
|
|
Timer
Starter
|
Included
|
Included
|
|
Timer
Starter Enclosure
|
Remote
|
Remote
|
| Controls |
With
an automatic cycle timer for one-button
operation to raise box, vibrate for a set
amount of time, and lower back onto
conveyor. Control panel is included
and includes a heavy-duty rheostat for force
output selection, cycle start button, and
emergency stop button.
|
Construction
The
rugged steel frame is fabricated from integrally
interlinked 1/2" steel plate. The lift bar
assembly is fabricated from 5/8” x 8” steel with
an interlocked rib system welded solid to a
5/8" steel base plate.
The lift bar assembly
is actuated by pneumatic air bags, each with a
capacity of 850 lbs. and a maximum stroke of 2”.
In the elevated position, the lift bars extend above
the roller conveyor approximately ½”.
Vertical
Vibrators
The vertical
vibrators are used to obtain the optimum
compactability of either wet or dry aggregates. The
vibrators provide an infinitely adjustable level of
output force while maintaining the high frequency
that is critical for the correct compaction.
Controls
All
vibrator controls and time relays are housed in NEMA
12 enclosures.
The cycle start
button and the force selector rheostat are located
at the operator control box.
Operation
The
item to be compacted is rolled onto the table
rollers and filled. Prior to striking off, the
operator presses the cycle start button. The air
bags inflate, lifting the item above the rollers the
vibrators run the amount of time set on the timer
located inside the enclosure. Once the vibrators
stop, the air bags lower the item to roller conveyor
surface.
Options
- Flat Top
- Manual
Conveyor
- Powered Conveyor
